Corners, the space behind cabinets and the area under the stairs are where air barely moves, so moisture settles there. 6,800 ft³/h (195 m³/h) of circulating airflow keeps room air passing over the coil, bringing water back from those corners one pass at a time.
This is the part most easily missed in basement drying: extraction capacity means little if the air never travels, because the unit can only look after the square metre it stands on.
The unit is rated at ≤48 dB(A). What that means at installation: basements, stair landings and laundry zones are half-open spaces where the machine will be heard, but staying under the threshold keeps it from reaching the floor above.
For equipment that runs for weeks, wattage is the cost. At 330 W the electricity for a whole wet season can be estimated before purchase, and an ordinary household circuit can carry it without a dedicated line.
The 24-hour timer and optional WiFi work in the same direction — one schedules the running window, the other makes status visible from elsewhere. Both are additions built around staying on.
A 3.5 L tank with a handle covers locations without a floor drain; a separate continuous drain port takes a hose where a drain or sump exists. Keeping both means the installation plan does not have to be bent around the machine.
The real risk in long-term dehumidifying is not damp — it is the unit being switched off because emptying became tedious. Give the drainage a choice and the machine keeps running.
The same model ships as 115V/60Hz and 220–240V/50Hz, rated 50 pints and 25 L respectively, while seven units from 22 to 50 pints share the platform and its parts pool.
![]()